Hey guys, I count days before receiving the batterys and installing my summer set up and try new thing with my set up! I try to sleep right now but I think of how I can improve my set up and I just had a pretty good idea!
Quick reminder of my set up
I use it right now with a limite switch on my gaz pédal to activate it. So only at WOT, the super charger goes on. I will put an hall effect sensor soon so I can tune the boost by RPM. I've install a BOV because I had some surge going on and I don't have the chance to be able to make it work. For 2 reason or maybe 1. #1 the spring may be to tight #2 I don't have enought tubing to have big volume of pressurised air.
Anyway my thought is, I need vacuum (off the throttle) to pull the BOV piston and pressure at the other side at the same time to push it. I've say to myself that I need to spin the turbo a little bit longer after letting off the throttle. AND there is where the good idea came! If I have for example 2sec ramp up power in the ESC plus the 1sec delay of the arduino every time I shift for 0.5sec. thats a lot of waisted second ! So, if I delay the arduino for 1sec before going off after lething the throtle, it will be always ON when I go to the drag! I will blow off when Im lift my foot, I will have time to shift and go back in WOT and the supercharger will never stop!
Hope this is well explain, I will go to sleep now
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.